Network Exam Answers links:
[FREE] Network Exam Answers | HOT
Posted on 24-Apr-2021
Inbound traffic from the DMZ network to the inside network is allowed. Inbound traffic from the outside network to the DMZ network is allowed. Returning traffic from the outside network to the inside network is allowed. Outbound traffic from the...
[ VIEW ANSWER ] [ Find Similar ]
[GET] Network Exam Answers | free!
Posted on 27-Mar-2021
Choose three. TCP uses port numbers to provide reliable transportation of IP packets. TCP uses windowing and sequencing to provide reliable transfer of data. TCP is a connection-oriented protocol. UDP is a connectionless protocol. UDP uses windowing...
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ Certification Exam N10-007 Practice Test 13
Posted on 24-Apr-2021
NAC systems can have the following capabilities: profiling and visibility — recognize and profile users and devices before malicious code can cause damage guest network access — manage guest access including authentication, registration, and sponsoring security posture check — evaluate security policy compliance by user type, device type, and operating system incident response — mitigate network threats by enforcing security policies 4. Which Cisco appliance can be used to filter network traffic contents to report and deny traffic based on the web server reputation? WSA can provide many types of logs related to web traffic security including ACL decision logs, malware scan logs, and web reputation filtering logs. The Cisco Email Security Appliance ESA is a tool to monitor most aspects of email delivery, system functioning, antivirus, antispam operations, and block list and allowed list decisions.
[ VIEW ANSWER ] [ Find Similar ]
Testout Network Pro Certification Exam Answers
Posted on 9-Apr-2021
The Cisco ASA is a firewall appliance. The Cisco Application Visibility and Control AVC system combines multiple technologies to recognize, analyze, and control over applications. Which command is used to enable AAA as part of the The switch port to which a client attaches is configured for the The client must authenticate before being allowed to pass data onto the network. Between which two Choose two.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 Routing And Switching: Introduction To Networks Final Exam
Posted on 20-Mar-2021
They provide four important functions: authentication, authorization, and accounting; posture assessment evaluating an incoming device against the security policies , quarantining of non-compliant systems, and remediation of noncompliant devices. Which feature is part of the Antimalware Protection security solution? What is the only type of port that an isolated port can forward traffic to on a private VLAN? The level of isolation can be specified with three types of PVLAN ports: Promiscuous ports that can forward traffic to all other ports Isolated ports that can only forward traffic to promiscuous ports Community ports that can forward traffic to other community ports and promiscuous ports What security countermeasure is effective for preventing CAM table overflow attacks?
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ Certification Practice Test Questions
Posted on 24-Apr-2021
What additional security measure must be enabled along with IP Source Guard to protect against address spoofing? Which mitigation technique would prevent rogue servers from providing false IP configuration parameters to clients? What are three techniques for mitigating VLAN hopping attacks? Choose three.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1: Introduction To Networks V5.1 + V6.0 Exams Answers 2021
Posted on 1-May-2021
What are two roles of the transport layer in data communication on a network? Choose two. The primary responsibilities include the following: Tracking the individual communication streams between applications on the source and destination hosts Segmenting data at the source and reassembling the data at the destination Identifying the proper application for each communication stream through the use of port numbers What information is used by TCP to reassemble and reorder received segments? Which two characteristics are associated with UDP sessions?
[ VIEW ANSWER ] [ Find Similar ]
Exam 98-366: Networking Fundamentals
Posted on 24-Apr-2021
Place the termination process steps in the order that they will occur. Not all options are used. The server acknowledges the client by sending a segment with the ACK flag set. The server sends a FIN to the client to terminate the server to client session. The client acknowledges the termination by sending a segment with the ACK flag set. Which flag in the TCP header is used in response to a received FIN in order to terminate connectivity between two network devices? The connected device that receives the segment will respond with an ACK to acknowledge that segment. What is a characteristic of UDP? UDP datagrams take the same path and arrive in the correct order at the destination.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 (v5.1 + V6.0) Chapter 3 Exam Answers For Network Protocols And Communications
Posted on 22-Apr-2021
Choose two. The network engineer is seeking a solution that provides high-speed converged traffic, including voice, video, and data on the same network infrastructure. The company also wants easy integration to their existing LAN infrastructure in their office locations. Which technology should be recommended? The network administrator that has the IP address of The FTP server is also a web server that is accessible to all internal employees on networks within the No other traffic should be allowed to this server.
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ N10-007 Practice Test
Posted on 3-Mar-2021
The fourth line of the ACL denies any other type of traffic to the server from any source IP address. The last line of the ACL permits anything else in case there are other servers or devices added to the Because traffic is being filtered from all other locations and for the In JSON, what is held within square brackets [ ]? One of the networks that must be advertised is What wildcard mask would the administrator use in the OSPF network statement? When following the best practices, in what location should the standard ACL be applied?
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 (v5.1 + V6.0) Chapter 5 Exam Answers For Ethernet
Posted on 2-Mar-2021
What is a function of Layer 4 of the OSI model? What is a benefit of using a layered model for network communications? What is the general term that is used to describe a piece of data at any layer of a networking model? Data is sent from the internet layer to the network access layer. Packets are sent from the network access layer to the transport layer. Segments are sent from the transport layer to the internet layer. What statement describes the function of the Address Resolution Protocol? ARP is used to discover the IP address of any host on a different network. ARP is used to discover the IP address of any host on the local network. Which address provides a unique host address for data communications at the internet layer? Which protocol is used by a computer to find the MAC address of the default gateway on an Ethernet network? If the default gateway is configured incorrectly on the host, what is the impact on communications? The host is unable to communicate on the local network.
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ Certification Practice Test 13 (Exam N)
Posted on 11-Apr-2021
The host can communicate with other hosts on the local network, but is unable to communicate with hosts on remote networks. There is no impact on communications. Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 (v5.1 + V6.0) Chapter 1 Exam Answers For Explore The Network
Posted on 14-Apr-2021
What is the purpose of a small company using a protocol analyzer utility to capture network traffic on the network segments where the company is considering a network upgrade? By using a protocol analyzer in each network segment, the network administrator can document and analyze the network traffic pattern for each segment, which becomes the base in determining the needs and means of the network growth. Refer to the exhibit. An administrator is testing connectivity to a remote device with the IP address What does the output of this command indicate?
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 V Final Exam
Posted on 10-Apr-2021
Connectivity to the remote device was successful. A router along the path did not have a route to the destination. A ping packet is being blocked by a security device along the path. The connection timed out while waiting for a reply from the remote device. Explanation: In the output of the ping command, an exclamation mark! Which method is used to send a ping message specifying the source address for the ping? Issue the ping command from within interface configuration mode. Issue the ping command without specifying a destination IP address. Issue the ping command without extended commands. Issue the ping command after shutting down un-needed interfaces. This allows the user to implement extended commands which include source IP address. A network engineer is analyzing reports from a recently performed network baseline.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1: Introduction To Networks V + V Exams Answers
Posted on 20-Apr-2021
Which situation would depict a possible latency issue? Which statement is true about Cisco IOS ping indicators? A user reports a lack of network connectivity. The technician takes control of the user machine and attempts to ping other computers on the network and these pings fail. The technician pings the default gateway and that also fails. What can be determined for sure by the results of these tests? The router that is attached to the same network as the workstation is down. Nothing can be determined for sure at this point. Explanation: In networks today, a failed ping could mean that the other devices on the network are blocking pings. Further investigation such as checking network connectivity from other devices on the same network is warranted. What is the purpose of the -6 command option?
[ VIEW ANSWER ] [ Find Similar ]
ITExamAnswers: Free Computer Networking Study Guide & Labs
Posted on 11-Apr-2021
It forces the trace to use IPv6. It limits the trace to only 6 hops. It sets a 6 milliseconds timeout for each replay. It sends 6 probes within each TTL time period. Why would a network administrator use the tracert utility? Tracert is commonly used when packets are dropped or not reaching a specific destination. A ping fails when performed from router R1 to directly connected router R2. The network administrator then proceeds to issue the show cdp neighbors command. Why would the network administrator issue this command if the ping failed between the two routers? The network administrator suspects a virus because the ping command did not work. The network administrator wants to verify Layer 2 connectivity.
[ VIEW ANSWER ] [ Find Similar ]
Network Quizzes Online, Trivia, Questions & Answers - ProProfs Quizzes
Posted on 8-Apr-2021
The network administrator wants to verify the IP address configured on router R2. The network administrator wants to determine if connectivity can be established from a non-directly connected network. Explanation: The show cdp neighbors command can be used to prove that Layer 1 and Layer 2 connectivity exists between two Cisco devices. For example, if two devices have duplicate IP addresses, a ping between the devices will fail, but the output of show cdp neighbors will be successful.
[ VIEW ANSWER ] [ Find Similar ]
Pass CompTIA Network+ Certification Exam In First Attempt Guaranteed!
Posted on 24-May-2021
The show cdp neighbors detail could be used to verify the IP address of the directly connected device in case the same IP address is assigned to the two routers. A network engineer is troubleshooting connectivity issues among interconnected Cisco routers and switches. Which command should the engineer use to find the IP address information, host name, and IOS version of neighboring network devices? The show interfaces and show version commands display information about the local device.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 (v + V) Chapter 1 Exam Answers For Explore The Network - Config Router
Posted on 20-Apr-2021
What information about a Cisco router can be verified using the show version command? Which command should be used on a Cisco router or switch to allow log messages to be displayed on remotely connected sessions using Telnet or SSH? Which command can an administrator issue on a Cisco router to send debug messages to the vty lines? Sending these messages to the terminal lines requires the terminal monitor command. By following a structured troubleshooting approach, a network administrator identified a network issue after a conversation with the user. What is the next step that the administrator should take?
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ Certification Exam Practice Quiz
Posted on 23-May-2021
Verify full system functionality. Test the theory to determine cause. Establish a theory of probable causes. Establish a plan of action to resolve the issue. Explanation: A structured network troubleshooting approach should include these steps in sequence: Identify the problem. Verify full system functionality and implement preventive measures. Document findings, actions, and outcomes. Users are complaining that they are unable to browse certain websites on the Internet. An administrator can successfully ping a web server via its IP address, but cannot browse to the domain name of the website. Which troubleshooting tool would be most useful in determining where the problem is? This command can help verify the DNS that is used and if the domain name to IP address resolution works. An employee complains that a Windows PC cannot connect to the Internet. A network technician issues the ipconfig command on the PC and is shown an IP address of Which two conclusions can be drawn?
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ Exam N10-007 Connectors & Cabling Quiz
Posted on 21-Apr-2021
Choose two. The DNS server address is misconfigured. The default gateway address is not configured. The PC is configured to obtain an IP address automatically. The enterprise network is misconfigured for dynamic routing. Host H3 is having trouble communicating with host H1. The network administrator suspects a problem exists with the H3 workstation and wants to prove that there is no problem with the R2 configuration.
[ VIEW ANSWER ] [ Find Similar ]
CompTIA Network+ (N10-007) Certification Sample Questions
Posted on 22-Mar-2021
What tool could the network administrator use on router R2 to prove that communication exists to host H1 from the interface on R2, which is the interface that H3 uses when communicating with remote networks? What does this indicate to the network administrator? Connectivity between H1 and H3 is fine. H3 is not connected properly to the network. Something is causing interference between H1 and R1. Performance between the networks is within expected parameters. Something is causing a time delay between the networks. Which network service automatically assigns IP addresses to devices on the network? Telnet is a method for remotely accessing a CLI session of a switch or router. Traceroute is a command used to determine the path a packet takes as it traverses the network. Which command can an administrator execute to determine what interface a router will use to reach remote networks?
[ VIEW ANSWER ] [ Find Similar ]
Pyen Final Exam Answers
Posted on 1-May-2021
Ccna 2 v7 Ccna 2 v7 9. CCNA1 v7. Refer to the exhibit. If the address is not there, the switch adds it. CCNA v7. Drop Files. Change the destination network and mask to 0. Do not close Packet Tracer when you are done. MAC address filtering is enabled. The first two commands are easy to comprehend, but the last command requires a little bit more thought. CCNA 1 v7. Begin preparing for a networking career with this introduction to how networks operate. Based on CCNA 6. This final course in the CCNA series describes the architectures and considerations related to designing, securing, operating, and troubleshooting enterprise networks. Choose two. It enters configuration mode for a switch virtual interface. A native VLAN is assigned to an This first course in the 3-course CCNA series introduces architectures, models, protocols, and networking elements — functions needed to support the operations and priorities of Fortune companies to small innovative retailers.
[ VIEW ANSWER ] [ Find Similar ]
CCNA Exam Answers - Cisco Network Academy - Config Router
Posted on 16-Mar-2021
Do not use the browser Back button or close or reload any exam windows during the exam. To earn CCNA certification, you pass one exam that covers a broad range of fundamentals for IT careers, based on the latest networking technologies, security, and automation and programmability skills and job roles. CCNA 2 v7. Modules 4 — 7 Exam Answers. Switching, Routing, and Wireless Essentials v7.
[ VIEW ANSWER ] [ Find Similar ]
CCNA Security V Chapter 6 Answers - Implementing Network Security
Posted on 3-Apr-2021
IT Exam Answers. It will close automatically. Free shipping for many products! First Step Toward a Networking Career. What type of VLAN supports untagged traffic? The trunk has been configured with the switchport nonegotiate command. It updates the MAC address table for the associated port. Which three advantages are provided by static routing?
[ VIEW ANSWER ] [ Find Similar ]
No comments:
Post a Comment